GE Series 90 - Serial Error Codes

Error code (Decimal)	Error code (Hex)	Meaning
00	0x0	Invalid X-Request Code
01	0x1	Privilege Level Insufficient
02	0x2	Invalid Memory Type
03	0x3	Invalid Address or Range
04	0x4	Invalid Data Length
05	0x5	Data Buffer Length Mismatch
06	0x6	Queue Full in Slave
07	0x7	Response Size Too Large
08	0x8	CMM Module Error
09	0x9	Illegal Broadcast
10	0xa	Invalid Message Type
11	0xb	Invalid Next Message Type or Length
12	0xc	Invalid Message Type in X-Buffer
13	0xd	Invalid Next Message Type in X-Buffer
14	0xe	Serial Output Timeout
15	0xf	SNP-X Request Aborted
16	0x10	Exceeded X-Buffer Message Size
17	0x11	PLC-CPU No Response
18	0x12	PLC Backplane Comm Error
19	0x13	Parity Error in X-Attach Message
20	0x14	Framing or Overrun Error in X-Attach Message
21	0x15	BCC Error in X-Attach Message
22	0x16	Invalid Message Type Expecting X-Attach
23	0x17	Invalid Next Message Type in X-Attach
24	0x18	Invalid Request Code in X-Attach
25	0x19	Parity Error in X-Request Message
26	0x1a	Framing or Overrun Error in X-Request Message
27	0x1b	BCC Error in X-Request Message
28	0x1c	Parity Error in X-Buffer Message
29	0x1d	Framing or Overrun Error in X-Buffer Message
30	0x1e	BCC Error in X-Buffer Message
31	0x1f	Expected X-Buffer Message Not Received
32	0x20	Unknown PLC Error
33	0x21	Unable to find connection address
40	0x28	Exceeded Maximum Data Size
41	0x29	Port Parameter(s) Out Of Range
42	0x2a	Serial Port Already In Use
43	0x2b	Timed Out Waiting For Echo
44	0x2c	NAK Received From Remote
45	0x2d	Unknown Response From Remote
46	0x2e	Timed Out Waiting For Response
47	0x2f	Bad Received BCC
48	0x30	Unmatched Message IDs
49	0x31	Unmatched Command/Response
50	0x32	Unknown Error
51	0x33	Device Address Out Of Range
52	0x34	Memory Address Out Of Range
53	0x35	Data Type Out Of Range
54	0x36	Invalid parameters
55	0x37	Unknown Error Code
56	0x38	No Errors
60	0x3c	Serial Port Parameter Out Of Range
64	0x40	Serial Port Access Denied
65	0x41	Serial Port General Failure