Omron Error Codes
Error codes other than the following may be PLC-specific. Consult the documentation for your device.
| Error code (Decimal) |
Error code (Hex) |
Meaning |
|---|---|---|
| 0 | 0x0 | No Error |
| 1 | 0x1 | Not executable in RUN mode |
| 16 | 0x10 | Parity Error |
| 17 | 0x11 | Framing Error |
| 18 | 0x12 | Overrun |
| 19 | 0x13 | FCS Error (checksum) |
| 20 | 0x14 | Format error (parameter length error) |
| 21 | 0x15 | Entry number data error |
| 22 | 0x16 | Instruction not found |
| 24 | 0x18 | Frame length error |
| 25 | 0x19 | Not executable |
| 2 | 0x2 | Not executable in MONITOR mode |
| 32 | 0x20 | I/O table generation impossible |
| 3 | 0x3 | Not executable with PROM mounted |
| 4 | 0x4 | Address over (data overflow) |
| 128 | 0x80 | Incomplete response to WRITE |
| 129 | 0x81 | Bad serial port parameters |
| 130 | 0x82 | Serial port already used |
| 131 | 0x83 | FCS Error (checksum) |
| 132 | 0x84 | No response from PLC (timed out) |
| 133 | 0x85 | Wrong PLC station address responded |
| 134 | 0x86 | TYPE parameter out-of-range |
| 135 | 0x87 | Garbled/Incomplete message |
| 160 | 0xA0 | Aborted due to parity error in transmit data |
| 161 | 0xA1 | Aborted due to framing error in transmit data |
| 162 | 0xA2 | Aborted due to overrun in transmit data |
| 164 | 0xA4 | Aborted due to format error in transmit data |
| 165 | 0xA5 | Aborted due to entry number data error in transmit data |
| 168 | 0xA8 | Aborted due to frame length error in transmit data |
| 11 | 0xB | Not executable in PROGRAM mode |
| 176 | 0xB0 | Not executable because the program area is not 16K |
| 191 | 0xBF | Connection Attempt Failed |
| 12 | 0xC | Not executable with PROM mounted |
| 13 | 0xD | Not executable in LOCAL mode |
