GUIRectangle

(Engine-Level Function)

Description: Draws a rectangle in a window. Can return a Boolean TRUE when selected by a mouse button or when the <ENTER> key is pressed after focus has been acquired.
Returns: GUI Object Return Codes
Usage: Steady State only.
Function Groups: Graphics
Format: GUIRectangle(LeftReference, BottomReference, RightReference, TopReference, ScaleLeft, ScaleBottom, ScaleRight, ScaleTop, ScaleWhole, Trajectory, Rotation, Opacity, Reserved, Button, FocusID, FocusTrigger, Brush, Pen)
Parameters:  
LeftReference
A constant number that gives the left side reference coordinate. It must be a constant. A variable or expression is not valid here.
BottomReference
A constant number that gives the bottom side reference coordinate. It must be a constant. A variable or expression is not valid here. The top and bottom references are measured down from the top of the screen.
RightReference
A constant number that gives the right side reference coordinate. It must be a constant. A variable or expression is not valid here.
TopReference
A constant number that gives the top side reference coordinate. It must be a constant. A variable or expression is not valid here.
ScaleLeft
Required. Either a numeric expression, or any expression that returns a Normalize value. This parameter scales this side from its reference position with respect to the opposite side. If it is a numeric expression, a value of 1 will place the side at its reference position. A value of 0 will place it at the opposite side reference position. Similarly, a Normalize value will scale the side between the high and low limits. If the value is at the high level, the side will be at its reference position. If the value is at the low level, the side will be at the opposite side reference position.
ScaleBottom
Required. Either a numeric expression, or any expression that returns a Normalize value. This parameter scales this side from its reference position with respect to the opposite side. If it is a numeric expression, a value of 1 will place the side at its reference position. A value of 0 will place it at the opposite side reference position. Similarly, a Normalize value will scale the side between the high and low limits. If the value is at the high level, the side will be at its reference position. If the value is at the low level, the side will be at the opposite side reference position.
ScaleRight
Required. Either a numeric expression, or any expression that returns a Normalize value. This parameter scales this side from its reference position with respect to the opposite side. If it is a numeric expression, a value of 1 will place the side at its reference position. A value of 0 will place it at the opposite side reference position. Similarly, a Normalize value will scale the side between the high and low limits. If the value is at the high level, the side will be at its reference position. If the value is at the low level, the side will be at the opposite side reference position.
ScaleTop
Required. Either a numeric expression, or any expression that returns a Normalize value. This parameter scales this side from its reference position with respect to the opposite side. If it is a numeric expression, a value of 1 will place the side at its reference position. A value of 0 will place it at the opposite side reference position. Similarly, a Normalize value will scale the side between the high and low limits. If the value is at the high level, the side will be at its reference position. If the value is at the low level, the side will be at the opposite side reference position.
ScaleWhole
Required. Either a numeric expression, or any expression that returns a Normalize value. This parameter scales the horizontal and vertical dimensions by the specified factor before the left, bottom, right and top coordinates are scaled.
Trajectory
Required. Either a Trajectory function, a variable containing a Trajectory value, or a numeric expression. If this is a Trajectory value or function, the appropriate translation is applied to the image after the rotation is applied. If it is a valid numeric expression, the image isn't translated, but is displayed. Any other value is Invalid.
Rotation
Required. Either a Rotate function, a variable containing a Rotate value, or a numeric expression. If this is a Rotate value or function, the appropriate rotation is applied to the image before the trajectory is applied. If it is a valid numeric expression, the image is rotated clockwise the number of degrees specified. Any other value is Invalid.
Opacity
Required. Any Numeric expression, setting the opacity of the object. A value of one results in a solid, zero is invisible and values between zero and one are used as an alpha setting for opacity.
Reserved     n/a
Reserved for future use, set to 0.
Button

Required. Any numeric expression giving the button combination that activates this graphic.

Value

Locator Buttons

0

No button combination will activate this graphic

1

Right button

2

Middle button

3

Right and middle buttons

4

Left button

5

Left and right buttons

6

Left and middle buttons

7

All three buttons

If the above values are multiplied by 8, the meaning for multiple buttons pressed becomes "OR" rather than "AND." For example, to accept any button on a 2 or 3 button mouse, use 56 (i.e. 8 * 7). To accept the left mouse button regardless of whether the right button is pressed, use 32 (i.e. 8 * 4).

If a 64 is added to this parameter, the function will become true when the mouse buttons are released rather than when they are pressed.

FocusID
FocusID is any numeric expression from 0 to 32767 giving the focus number of this graphic. If FocusID is zero, this graphic cannot receive the input focus. This parameter's value may be used in a NextFocusID statement to force this graphic to get the focus.
FocusTrigger
Required. Any logical expression. If FocusTrigger changes from a valid false to a valid true, this graphic will attempt to obtain focus.
Brush
Required. Any expression that returns a Brush value to be used to describe the fill. For a solid color fill, you may use any of the following:
Pen
Required. Any expression that returns a Pen value to describe the color, width and line style of the border. For a 1-pixel solid border, you may use any of the following:
Comments: This function is a layered graphics statement. See "Use Scaling to Position GUI Objects" for information about positioning a layered graphic.
The Left and Right references are interchangeable. Whichever is smaller is taken as the left and the larger of the two values will be used as the right. The same is true of the top and bottom references. Note that the 1st 42 pixels of a VTScada application will be obscured by the title bar, if present.

Examples:

  GUIRectangle(19, 126, 143, 58,
               1, 1, 1, 1, 1 { Scaling              },
               0, 0          { Movement             },
               1, 0          { Visibility, Reserved },
               0, 0, 0       { Selectability        },
               Brush("<FFA0A0A0>", 0, 1), Pen("<FF000000>", 1, 1));

A basic gray rectangle with a single-pixel-wide, black border.

  GUIRectangle(25, 100, 225, 80 { Bounding box of rectangle },
               1, 1, 1, 1, 1 { No scaling },
               0, 0 { No trajectory or rotation },
               1, 0 { Rectangle is visible; reserved },
               4 { Left mouse button },
               5 { Focus ID number },
               MatchKeys(2, "T"){ Focus trigger },
               Brush(14, 0, 1) { Brush is yellow, background
                                 ignored (style is solid) },
               Pen(2, 1, 1) { Pen is dark green solid
                              line, 1 pixel wide });

This shows a rectangle in the upper left corner of the window. If it is clicked with the left mouse button, or if it is focused and the return key is pressed, it will return true. This rectangle will attempt to get the keyboard input focus when the "T" key is pressed (because of the MatchKeys function in the trigger). It is focus number 5. This is the number to use in the NextFocusID function to force this graphic to get the focus. No scaling is performed, and no animation is performed.

The first four parameters must be constants. See GUITransform for an example of how to compute the position dynamically.

Bar | Box | NextFocusID | Normalize | Rotate | Trajectory | ZBar | ZBox| GUITransform | VStatus