CommFailValueAttrMask
Select the attributes that qualify as a communication failure. The property value is formed by adding together bit values from the table below.
| Bit Number | Defined Constant Name | Meaning |
|---|---|---|
| 0 | #DATA_ATTR_MANUAL_DATA | The value was from the tag's ManualData parameter |
| 1 | #DATA_ATTR_MANUAL_ENTRY | The value was manually entered |
| 2 | #DATA_ATTR_EDITED_DATA | The historical value was manually edited |
| 3 | #DATA_ATTR_QUESTIONABLE | The tag was marked as questionable |
| 4 | #DATA_ATTR_STALE_DATA | The value was reported as stale by VTSDriver |
| 5 | #DATA_ATTR_IMPORTED | The value was imported from a CSV file |
| 6 | #DATA_ATTR_COMMFAIL | The driver experienced a comm failure |
| 7 | #DATA_ATTR_QUALITY | The tag has marked the value as unreliable |
| 8 | #DATA_ATTR_DRIVER_COMMFAIL | The PLC reported a downstream comm failure |
| 9 | #DATA_ATTR_DRIVER_QUALITY | The PLC reported the value may be unreliable |
| 10 | #DATA_ATTR_DRIVER_OVERRIDDEN | (*) The PLC reported the value was overridden |
| 11 | #DATA_ATTR_DRIVER_NODATA | (*) The PLC reported there is no data available |
The CommFailValueAttrMask can be set to include any of the bits, e.g. a mask 1001 would match DATA_ATTR_MANUAL_DATA and DATA_ATTR_QUESTIONABLE.
The default mask value includes:
Bit number 4 - #DATA_ATTR_STALE_DATA
Bit number 6 - #DATA_ATTR_COMMFAIL
Bit number 8 - DATA_ATTR_DRIVER_COMMFAIL
Bit number 11 - #DATA_ATTR_DRIVER_NODATA
or 0b100101010000 = 2384
Related property: CommFailValueOption to specify special handling.
(See: Bitwise Parameters & Operations)
Section: System
Default: CommFailValueAttrMask = 2384
*No restart required (Settings.Dynamic property)