CommFailValueOption
Controls how data is represented in the HDV from the last value logged before communication failure to the first logged value after communication is restored.
0 = Do nothing.
VTScada will draw a flatline for a discrete or digital tag, or a slope for an analog tag.
1 = Show a gap. (Default)
VTScada does not plot a line during communication failure. The gap represents missing data.
2 = Show a flat line.
For all IO tags including analog, VTScada will show a flat plateau that steps up or down to the next actual point.
See CommFailValueAttrMask to specify attributes that qualify as a communication failure.
Section: System
Default: CommFailValueOption = 1
*No restart required (Settings.Dynamic property)