Input Tags
Input tags are used to read data from an I/O device, such as a programmable logic controller (PLC), remote terminal unit (RTU), or an I/O board. These tags permit the handling of either digital (discrete), or analog (continuous floating point) values.
All input tags require a driver tag, which will provide the communication protocol required for the device. In general, it is best to configure a driver tag first, then add input tags later as children of that driver.
The following input tags are included with VTScada:
| Analog Input Tags | Analog Status Tags |
| Digital Input Tags | Digital Status Tags |
| Data Flow Pulse Input Tags | Pump Status Tags |
| String I/O Tags | |
Communication Driver Tags - Driver tag reference
The Tag Browser - Using the Tag Browser to create and edit tags.
Optimize Your Configuration - Avoid problems when logging data
